.498 12.65 "a" do not scale from this print .100 ref 2.54 (no of pos x .050 [1.27]) + .100 [2.54] ref (no of pos x .050 [1.27]) - .050 [1.27] .050 ref 1.27 .220 5.59 ref .020 ref 0.51 @ .050 [1.27] 3 eq spaces "a" "a" "b" "b" a1 b1 c1 d1 folc-1xx-mx-xx-q-x no of positions -05 thru -50 lead style plating specification (values given are in micro-inches) -s: selective, 30 au / 50 ni min on contact, matte tin tail. -sm: selective, 30 au / 50 ni min on contact, matte tin tail. -l: light selective, 10 au / 50 ni min on contact, matte tin tail. -q: four row (use folc-xx-q) body specification -p: pick & place pad (use ppp-18, see fig 3) -tr: tape & reel -lc: locking clip (see note 3) (use (2) lc-09-tm, see fig 2) option -m1: mixed technology (.075 [1.91] tail) (use c-44-03-xx for thru hole leads) (use c-44-02-xx for smt leads) -m2: mixed technology (.120 [3.05] tail) (use c-44-04-xx for thru hole leads) (use c-44-02-xx for smt leads) .010 ref 0.25 (no of pos x .050 [1.27]) +.050 [1.27] .108 ref 2.74 .016 ref 0.41 "a" .180 ref 4.57 (no of pos x .050 [1.27]) + .020 [.51] ref 2 max sway (either direction) section "a"-"a" packaging tube view folc-xx-q fig 2 .005 ref 0.13 90 - 5 +0 .1850 4.699 .263 6.68 2 max sway (either direction) section "b"-"b" c-44-02-xx c-44-xx-xx pins can be oriented in any direction as long as all pins in all rows are oriented the same .006 [.15] .0560 1.42 ref .055 1.40 lc-09-tm r .270 ref 6.86 ppp-18 c l .325 8.26 ref .050 1.27 ref b1 c1 d1 a1 a2 fig 1 folc-1xx-m1-xx-q shown d2 in-process -p: pick and place pad -lc option note: -p option view to be packaged in pt-1-24-01-127 (tubes) and (2) tp-03 (plug) per tube note: parts without -p option to be packaged in pt-1-24-05-38 (tubes) and (2) tp-03 (plugs) per tube r fig 3 c l (place ppp-18 about as shown c .498 12.65 "a" sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 5 .xxx: .005 [.13] .xxxx: .0020 [.051] material: by: folc-1xx-mx-xx-q-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing tim plummer 03-29-96 1 1 sheet scale: 2:1 f:\dwg\misc\mktg\folc-1xx-mx-xx-q-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 .050 x .050 centerline 4 row mixed tech. socket strip insulator: lcp, ul 94 vo color: black contact: becu notes: 1. represents a critical dimension. 2. minimum pushout force: .5 lbs. 3. due to the high amount of insertion force needed, the -lc option is not compatible with auto placement. samtec recommends manual placement for all assemblies with the -lc option. revision r
|
